1 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change thin film chip resistors ntr series features ? precise tolerance and temperature coefficient ? eia standard case sizes (0201 ~ 2512) ? low noise, thin film (nicr) construction ? reflow solderable (pb free termination finish) *see part number system for details rohs compliant includes all homogeneous materials power rating (watts) x resistance (ohms) note *1 - maximum allowable continuous working voltage for all resistors is the lower of the two values: ?maximum working voltage? as speci ed above or 2 x power rating (watts) x resistance (ohms) note *2 - maximum overload voltage for all resistors is the lower of the two values: "maximum overload voltage? as speci ed above or type eia size powerrating at 70c max.*1 working voltage max.*2 overload voltage resistance tolerance (code) temperature coef cient (ppm/c) resistance range ( ) resistance values ntr02 0201 1/32 (0.032)w 15v 30v 0.5% (d) 25(c), 50(d) 49.9 ~ 4.99k e-24, e-96 & e-192 1.0% (f) 50 (d) 49.9 ~ 33k ntr04 0402 1/16 (0.063)w 25v 50v 0.01% (t), 0.05% (a), 0.1% (b) 5 (s) 49.9 ~ 4.99k 10 (b) 49.9 ~ 12k 0.01% (t), 0.05% (a) 15 (n) 49.9 ~ 12k 0.1% (b) 15 (n) 49.9 ~ 69.8k 0.1% (b), 0.25% (c), 0.5% (d), 1% (f) 25 (c) 10 ~ 205k 0.1% (b), 0.25% (c) 50 (d) 10 ~ 205k 0.5% (d), 1% (f) 50 (d) 1.0 ~ 205k ntr06 0603 1/16 (0.063)w 50v 100v 0.01% (t), 0.05% (a), 0.1% (b) 5 (s) 24.9 ~ 15k 0.01% (t) 10(b), 15(n) 24.9 ~ 100k 0.05% (a), 0.1% (b) 10(b), 15(n) 4.7 ~ 332k 0.05% (a) 25(c), 50(d) 4.7 ~ 332k 0.1% (b) 25(c), 50(d) 4.7 ~ 1m 0.25 (c), 0.5 (d), 1% (f) 25(c), 50(d) 2.0 ~ 1m ntr10 0805 1/10 (0.10) w 100v 200v 0.01% (t), 0.05% (a), 0.1% (b) 5 (s) 24.9 ~ 30k 0.01% (t) 10(b), 15(n) 24.9 ~ 200k 0.05% (a), 0.1% (b) 10(b), 15(n) 4.7 ~ 511k 0.05 (a) 25(c), 50(d) 4.7 ~ 511k 0.1% (b) 25(c), 50(d) 4.7 ~ 2m 0.25 (c), 0.5 (d), 1% (f) 25(c), 50(d) 1.0 ~ 2m ntr12 1206 1/8 (0.125) w 150v 300v 0.01% (t), 0.05% (a), 0.1% (b) 5 (s) 24.9 ~49.9k 0.01% (t) 10(b), 15(n) 24.9 ~ 499k 0.05% (a), 0.1% (b) 10(b), 15(n) 4.7 ~ 1m 0.05% (a) 25(c), 50(d) 4.7 ~ 1m 0.1% (b) 25(c), 50(d) 4.7 ~ 2.49m 0.25% (c), 0.5% (d), 1% (f) 25(c), 50(d) 1.0 ~ 2.49m ntr20 1210 1/5 (0.20) w 150v 300v 0.01% (t), 0.05% (a), 0.1% (b) 5 (s) 24.9 ~49.9k 0.01% (t) 10(b), 15(n) 24.9 ~ 499k 0.05% (a), 0.1% (b) 10(b), 15(n) 4.7 ~ 1m 0.05% (a) 25, 50 4.7 ~ 1m 0.1% (b) 25(c), 50(d) 4.7 ~ 2.49m 0.25% (c), 0.5% (d), 1% (f) 25(c), 50(d) 1.0 ~ 2.49m ntr25 2010 1/4 (0.25) w 150v 300v 0.01% (t), 0.05% (a), 0.1% (b) 5 (s) 24.9 ~ 100k 0.01% (t) 10(b), 15(n) 24.9 ~ 499k 0.05% (a), 0.1% (b) 10(b), 15(n) 4.7 ~ 1m 0.05% (a) 25(c), 50(d) 4.7 ~ 1m 0.1% (b) 25(c), 50(d) 4.7 ~ 3m 0.25% (c), 0.5% (d), 1% (f) 25(c), 50(d) 1.0 ~ 3m ntr50 2512 1/2 (0.50) w 150v 300v 0.01% (t), 0.05% (a), 5 (s) 24.9 ~ 100k 0.01% (t) 10(b), 15(n) 24.9 ~ 499k 0.05% (a), 0.1% (b) 10(b), 15(n) 4.7 ~ 1m 0.05% (a) 25(c), 50(d) 4.7 ~ 1m 0.05 (a) 25(c), 50(d) 4.7 ~ 1m 0.1% (b) 25(c), 50(d) 4.7 ~ 3m 0.25% (c), 0.5% (d), 1% (f) 25(c), 50(d) 1.0 ~ 3m
2 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change environmental characteristics typical noise characteristics resistance value ( ) case size 0603 0805 1206 1 ~ 9 -95db -95db -95db 10 ~ 49 -85db -85db -85db 50 ~ 99 -85db -85db -85db 100 ~ 4.99k -100db -100db -105db 5k ~ 19.9k -100db -100db -100db 20k ~ 1m -90db -100db -100db thin film chip resistors ntr series 0 20 40 60 70 80 100 120 140 155 percentage of power rating 100 80 60 40 30 20 temperature c power derating curve: for operation above 70c, power rating must be derated according to the following chart: 0201 all other sizes 125c *0201 testing per iec 60115 - 1 item speci cation typical test method* tol. < 0.05% tol. > 0.05% tol. > 0.05% 0 4 0 2 0402 0 6 0 3 0603 0 8 0 5 0805 standard temperature range: -55c ~ +155c (power derating above +70c) temperature coef cient of resistance as speci ed as speci ed - - - +25/-55/+25/+125/+25 short time overload r 0.05% r 0.2% -0.001% -0.002% -0.005% rcwv x 2.5 or max overloading voltage for 5 seconds dielectric withstanding voltage as speci ed 265v 298v 415v mil-std-202f method 301 apply max. overload voltage for 1 minute insulation resistance >1000m >10g mil-std-202f method 302 apply 100vdc for 1 minute thermal shock (n/a 0201 size) r 0.05% r 0.25% 0.001% -0.02% 0.002% mil-std-202f method 107g -55c ~ +150c, 100 cycles load life r 0.05% r 0.2% no change mil-std-202f method 108a rcwv +70c, 1.5 hours on, 0.5 hours off total time 1,000 ~ 1,048 hours >7k r 0.5% 0.02% 0.03% 0.06% humidity (steady state) r 0.05% r 0.3% 0.003% 0.005% 0.007% mil-std-202f method 103b +40c, 90% ~ 95% rh, rcwv 1.5 hours on, 0.5 hours off total time 1,000 ~ 1,048 hours resistance to dry heat (n/a 0201 size) r 0.05% r 0.5% 0.07% 0.02% 0.025% mil-std-202 method 108 +125c, 1000 hours low temperature operation (n/a 0201 size) r 0.05% r 0.2% 0.006% 0.008% 0.001% jis-c-502-7.1 1 hour @ -65c followed by 45 minutes of rcwv bending strength r 0.05% r 0.2% 0.001% -0.010% 0.002% jis-c-5202-6.1.4 bending amplitude 3mm for 10 seconds solderability 95% minimum coverage >95% mil-std-202f method 208h 245c 5c, 5 0.5 seconds resistance to soldering heat r 0.05% r 0.2% 0.001% -0.02% 0.006% mil-std-202f method 210e 260c 5c for 10 1 seconds
3 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change thin film chip resistors ntr series standard e-24, e-96 and e-192 values and 0603 resistance codes multiplier code 1. no marking on 0402 case size. 2. marking for 0603 case size: e-24 values and e-96 values: 1% (f), 0.5% (d), 0.25% (c). 0.1% (b) tolerances e-192 values: 0.1% (b) tolerance (no marking) resistance code xx coding formula multiplier code x marking examples 10 = 01x 7.5k = 85b 150k = 18d 1 meg = 01e example: 10.2k = 102 x 10 2 = 02c 33.2 = 332 x 10 -1 = 51x 02 c 51 x 3. marking for 0805, 1206, 2010 and 2512 case sizes: e-24 and e-96 values - 1%(f), 0.5% (d), 0.25%(c), 0.1% (b) tolerances e-192 values: 0.1% (b) tolerance (no marking) 4 digit marking system - first 3 digits are the signi cant gures, the 4th digit is the mulitplier. "r"= decimal point. examples: 0r10 = 0.10 ohms, 1r00 = 1.0 ohms, 22r1=22.1 ohms, 3320= 332 ohms, 4751=4.75k ohms, 1132=11.3k ohms, 6493=649k ohms code a b, b c d, d e f g h x y z multiplier 10 0 10 1 10 2 10 3 10 4 10 5 10 6 10 7 10 -1 10 -2 10 -3 e-24 e-96 value value code value code value code value code 100 100 01 102 02 105 03 107 04 110 110 05 113 06 115 07 118 08 120 121 09 124 10 127 11 130 12 130 133 13 137 14 140 15 143 16 150 147 17 150 18 154 19 158 20 160 162 21 165 22 169 23 174 24 180 178 25 182 26 187 27 191 28 200 196 29 200 30 205 31 210 32 220 215 33 221 34 226 35 232 36 240 237 37 243 38 249 39 255 40 270 261 41 267 42 274 43 280 44 300 287 45 294 46 301 47 309 48 330 316 49 324 50 332 51 340 52 360 348 53 357 54 365 55 374 56 390 383 57 392 58 402 59 412 60 430 422 61 432 62 442 63 453 64 470 464 65 475 66 487 67 499 68 510 511 69 523 70 536 71 549 72 560 562 73 576 74 590 75 604 76 620 619 77 634 78 649 79 665 80 680 681 81 698 82 715 83 732 84 750 750 85 768 86 787 87 806 88 820 825 89 845 90 866 91 887 92 910 909 93 931 94 953 95 976 96 part number system ntr 10 b 1003 c tr 1k f rohs compliant optional 1,000 piece reel quantity tape & reel packaging temperature coef cient code: s = 5ppm, b = 10ppm, n = 15ppm, c = 25ppm, d = 50ppm resistance code: first 3 digits are signi cant gures (both e-24 and e-96 values), 4th digit is the multiplier, ?r? indicates a decimal point. tolerance code: t = 0.01%, a = 0.05%, b = 0.1%, c = 0.25%, d = 0.5%, f = 1% power rating code series * special e192 resistance values are supported on all case sizes of ntr series. please review your e192 value requirements with nic, as special terms apply, and e192 values are supplied without component resistance value marking. e-192* value value value value value value 100 147 215 316 464 681 101 149 218 320 470 690 102 150 221 324 475 698 104 152 223 328 481 706 105 154 226 332 487 715 106 156 229 336 493 723 107 158 232 340 499 732 109 160 234 344 505 741 110 162 237 348 511 750 111 164 240 352 517 759 113 165 243 357 523 768 114 167 246 361 530 777 115 169 249 365 536 787 117 172 252 370 542 796 118 174 255 374 549 806 120 176 258 379 556 816 121 178 261 383 562 825 123 180 264 388 569 835 124 182 267 392 576 845 126 184 271 397 583 856 127 187 274 402 590 866 129 189 270 407 597 876 130 191 280 412 604 887 132 193 284 417 612 898 133 196 287 422 619 909 135 198 291 427 626 920 137 200 294 432 634 931 138 203 298 437 642 942 140 205 301 442 649 953 142 208 305 448 657 965 143 210 309 453 665 976 145 213 312 459 673 988
4 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change thin film chip resistors ntr series dimensions (mm) taping specifications (1) availability type power rating eia size l w h t t ntr02 1/20w 0201 0.58 0.05 0.29 0.05 0.23 0.03 0.12 0.05 0.15 0.05 ntr04 1/16w 0402 1.0 0.05 0.5 0.05 0.30 0.05 0.2 0.10 0.20 0.10 ntr06 1/16w 0603 1.55 0.10 0.8 0.10 0.45 0.10 0.3 0.20 0.30 0.20 ntr10 1/10w 0805 2.0 0.15 1.25 0.15 0.55 0.10 0.3 0.20 0.40 0.25 ntr12 1/8w 1206 3.05 0.10 1.55 0.10 0.55 0.10 0.42 0.20 0.35 0.25 ntr25 1/4w 2010 4.9 0.15 2.4 0.15 0.55 0.10 0.6 0.30 0.50 0.25 ntr50 1/2w 2512 6.3 0.15 3.1 0.15 0.55 0.10 0.6 0.30 0.50 0.25 type power rating eia size carrier tape qty per reel (pcs) fig. material width (mm) standard optional ntr02 1/32w 0201 a paper 8 10,000 1,000 ntr04 1/16w 0402 a 10,000 1,000 ntr06 1/16w 0603 a 5,000 1,000 ntr10 1/10w 0805 a ntr12 1/8w 1206 a ntr25 1/4w 2010 b plastic 12 4,000 1,000 ntr50 1/2w 2512 b
5 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change thin film chip resistors ntr series (2) paper tape dimensions (mm) fig. a p 1 a f t w b d p 0 cover tape e p 2 fig. a (2) plastic embossed tape dimensions (mm) fig. b p 1 a fw b d p 0 e p 2 fig. b t cover tape land pattern dimensions (mm) a b c peak reflow soldering conditions 200 300 250 50 150 100 0 120 sec. 260c 10 sec. 1 ~ 9c/sec. 1 ~ 5c/sec. 1 ~ 5c/sec. type eia size a b d e f p 0 p 1 p 2 wt ntr02 0201 0.38 0.03 0.68 0.03 1.55 0.05 1.75 0.10 3.50 0.05 4.0 0.10 2.0 0.05 2.0 0.05 8.0 0.1 0.31 0.02 ntr04 0402 0.67 0.03 1.15 0.03 0.40 0.03 ntr06 0603 1.10 0.05 1.90 0.05 4.0 0.05 0.60 0.03 ntr10 0805 1.60 0.05 2.37 0.05 0.75 0.05 ntr12 1206 2.00 0.05 3.55 0.05 type eia size a b d e f p 0 p 1 p 2 wt ntr25 2010 2.85 0.10 5.45 0.10 1.50 0.10 1.75 0.10 5.50 0.05 4.0 0.10 4.0 0.05 2.0 0.05 12.0 0.1 0.85 0.10 ntr50 2512 3.40 0.10 6.65 0.10 type eia size a b c ntr02 0201 0.28 0.20 0.34 ntr04 0402 0.50 0.50 0.60 0.2 ntr06 0603 0.80 0.70 0.90 0.2 ntr10 0805 1.00 1.00 1.35 0.2 ntr12 1206 2.00 1.15 1.70 0.2 ntr25 2010 3.60 1.40 2.40 0.2 ntr50 2512 4.90 1.60 3.00 0.2 11.4 + 1.0 (0402 ~ 1206) 16.4 1.0 (2010 ~ 2512) 9.0 + 0.5 (0402 ~ 1206) 14 0.5 (2010 ~ 2512) 21 0.8 2.0 0.5 w 1 180 ? 3 60 ? 2 13 ? 0.5 w 2
|
